This weeks blog post will continue showing you some of the tools and equipment that I use every day to repair your watch.  I was very surprised at the level of interest in last weeks post, I have had more questions and comments on that post than any blog post so far.  I am glad to see that everyone is interested in how your watch is repaired and how a normal day is at the “watch shop”.

My Glasses and Loupe

My glasses and Loupe are the heart of my job. Without my loupe I am out of business. I started my career with a single eye eyepiece loupe.  That worked fine for about 10 years, but my eyes changed a bit and I need to move on to glasses and my standard double loupe.  This system works much better for me, my glasses are a bit tinted to cut down on the glare of my bench lamp, so there is less eye strain. I am using a Behr Loupe model #55 The loupe is 2 in x 3 1/2 focal length.  That means when I am working normally, I just have one lens that I am looking through and the distance from the lens to the work area is 3 1/2  inches.   When I fold down the outer lens, then the work distance is closer, down to 2 inches.  The magnification is 3 power single, 5 power double.  This is also personal preference, so the distance to your work area can be shortened or lengthened by the different lenses that you use.  Mine is pretty standard.  When you use both lenses, for hairspring work for example, you are now closer to the work and things get bigger, it is also a bit tougher to “operate”.

loupe1

loupe2

loupe3
My old single Loupe

 

ΓΈ;
Tom and I ready for another day at the shop

One interesting note on my son Tom.  He is left-handed, but right eyed.  Very unusual to be able to work with your left hand while looking through your right eye to work!!  Working on a watch with your left hand is also  difficult, even watches are set up for us righties!

Case Wrenches

Starting off the process of repairing your watch, you need to open the case.  On the left is a standard adjustable case wrench that is used on most  screw back cases.  On the right is a Rolex case wrench.

case wrench

Crystal Lift

This is a crystal lift, it is used when removing a standard plastic crystal.  The black knob on the bottom is tightened and that squeezes the crystal just enough to remove or install it.

crystal lift

Pliers

Standard set of pliers, Made in Germany.  A bit expensive, but the quality is outstanding.

pliers

Broaches

These broaches come in different sizes and are used to clean out or enlarge a hole in a watch case etc.  Lots of different uses around the shop.

broaches

Grinding wheels

These are an assortment of small grinding wheels that fit into my flexible shaft.  They are used whenever I need to sharpen, shape, or polish a watch part or in refinishing a watch case.

grinding wheels

Buffing Wheels

These are larger buffing wheels that I also use on my flexible shaft.  They are used in refinishing a watch case and can remove scratches or put the brush finish back on a case.  I use them at a slow speed so that I can control the level of polishing.

buffing wheels

One Touch

If you are in my age bracket (over 50) you may remember “Silly Putty”. One touch is a soft stretchy substance that is used in a variety of duties every day.  It can be used to remove oil or fingerprints from a watch movement, you can use it to hold or pick up a tiny spring or jewel, it will hold a part in place on your bench etc…  A tool that has many uses and is always withing easy reach on my bench

one touch

Next week I will show you my Buffing, Cleaning and Timing Machines…   Lots of cools stuff to come!